Product System
Temperature: measuring range - 40 ~ 60 ℃ ° C
Accuracy ± zero point one ° C; two
Temperature: measurement range 0 ~ 100% RH
Air pressure: measuring range: 10 ~ 1300
Wind speed measurement range: 0-75 M / S
Switch cabinet partial discharge sensor (UHF)
The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)
Switch cabinet partial discharge sensor (UHF + AE two in one)
The system adopts UHF + AE principle
Ultra low power consumption and 485 bus communication mode are adopted,
It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge
Intelligent air conditioning / dehumidification linkage device
AC / dc220v power supply is adopted
Allowable deviation - 20% ~ + 20%
Control output node capacity: AC / dc220v, ≥ 8A
Support 2-4 independent node output capability
Intelligent light control unit
Output mode: switch type, realize local and remote control of lighting
Wall mounted / 2U rack mounted
Using brand devices to ensure reliability
Size (mm): 480mm long × 85mm wide × 340mm deep
Intelligent water pump control unit
Output mode: switch type, realize the linkage control of water pump
Wall mounted / 2U rack mounted,
Using brand devices to ensure reliability
Size (mm): 480mm long × 85mm wide × 340mm deep
Output mode: switch type, realize the linkage control of fan
Wall mounted / 2U rack mounted
Using brand devices to ensure reliability
Size (mm): 480mm long × 85mm wide × 340mm deep
Battery on line monitoring device
Communication mode: RS485,
Overall voltage monitoring range: dc0v ~ 220V;
Monitoring range of single battery voltage: DC2V ~ 24V;
Current monitoring range: 0 ~ 1000A;
Environmental temperature monitoring: 0 ~ 100 ℃;
Measurement range of internal resistance: 0.1M Ω~ 100m Ω。
On line monitoring device of fluorescence optical fiber temperature measurement
RS485 communication interface
Temperature range: 40-200 ℃,
Temperature measurement accuracy: ± 1℃,
Number of temperature measuring channels: 6.
On line monitoring device for action characteristics of circuit breaker
Communication mode: network port or RS485 signal output
Installation mode: wall mounted
Power supply: AC220V
It can realize real-time monitoring of characteristic parameters such as opening and closing time and current of AC / DC circuit breaker.
Working power: AC 220V,
dehumidification capacity: 400ml/d,
power: 60W,
the whole machine working power (dehumidification) can be customized,
RS485 communication, the heater control function and data communication function can be extended and wireless receiver can realize communication function. Switch cabinet and ring network cabinet are commonly used.
Door state sensing distance: 20-30mm
Signal output: normally open / normally closed
Electrical parameters: maximum power 10W, maximum voltage 100V
Maximum current 0.5A (customizable)
Working power supply: DC 12V
Carrier frequency: 38kHz
Remote control distance: 10M
Temperature probe: - 10 ℃~ + 60 ℃
Weight: 90g
Power consumption: DC 12V, < 100mA
Alarm: can be external active or passive alarm
Unlocking mode: mobile app, QR code identification, password, induction
Card, mechanical key, etc
Card reading distance: 0-15cm
Card reading time: < 1s
Communication interface: RS485, RJ45, Mini USB
Controllable gate output: 1 / 2 / 4 gate optional
Digital processor 12 / 8 bits 8 MHz
Continuously adjustable sensitivity, high protection range, sensitivity: 9m distance
Power input 9-16vdc
The alarm output is normally closed.