-
-
Product System
-
News Information
-
Product System
Product System
Product System
Wireless air pressure measurement sensor
Real-time online monitoring of the absolute pressure and temperature of the atmospheric environment.
380v wire and cable anti-theft sensor
The DXT-K three-phase power-off sensor will output a normally open and normally closed switch signal when it detects any one of the A phase, B phase, and C phase of the three-phase AC power is cut off. Applicable to various industries such as communication room, hospital, electric power supply, customs, bank, government agency, factories and mines. The smart or GSM short message remote notification of power failure and incoming call alarms can be customized.
Distributed fault location monitoring and pre-alarm system for transmission lines
The distributed fault diagnosis system of the transmission line obtains the traveling wave current at the time of the fault through the monitoring terminals installed on the conductors in a distributed manner, determines the fault location, and uses intelligent identification technology to analyze the fault waveform characteristics and identify the fault as a lightning fault or a non-lightning fault. In the case of a lightning failure, a lightning shielding or counter-strike failure will be further separately issued. The transmission line fault diagnosis method based on distributed monitoring overcomes the shortcomings of traditional methods that require the installation of monitoring equipment on the poles and towers one by one. You only need to install a set of monitoring devices every 20 to 30 kilometers across the entire line to achieve full line fault monitoring. The current technology is advanced and practical, lightning strike/non-lightning fault identification and location system.
Insulator contamination online monitoring equipment
The system can detect air temperature, line meter temperature (high-voltage terminal field), humidity, wind speed and direction, air pressure, rainfall, leakage current of insulators, calculate pollution flashover warnings, ice thickness, calculate icing warnings and upload videos Images or pictures, real-time monitoring of the scene. In addition, the system can support solar power supply; it is convenient to get electricity. In addition, it is also anti-lightning, anti-corrosion, anti-magnetic, and anti-high voltage. Its transmission communication channel can be compatible with PRS, CDMA, 3G, Internet or a form of communication with superior performance;
Bearing vibration online monitoring sensor
This product uses a fully integrated process and stainless steel material, eliminating the need for connection to the secondary meter, and improving stability and anti-interference ability. It can be widely used in rotating machines such as fans, pumps, motors, steam turbines, and compressors.
LTM rod series displacement sensor
.Excellent linearity ±0.05%
.The resolution is higher than 0.01mm
.High running speed 10m/s
.Protection grade IP65
.DIN43650 standard plug and socket
.Long service life-movement times greater than 100×106 times
.Absolute value measurement, no need to power off memory or return to origin
.This series of sensors are used in measurement and control systems to directly and absolutely measure displacement and length. The structure of the sensor is designed to facilitate installation and disassembly.
The surface of the sensor is specially treated to work at high speed and low wear. The ball and socket coupling at the front of the sensor can overcome some slight lateral stress of the transmission rod.
Ensure the normal operation of the sensor. The sensor's conductive plastic material fixation and structural design process ensure that the sensor can work reliably even under harsh conditions.
Sliding card slot is convenient for installation position adjustment. Application: injection molding machine, hydraulic press, woodworking machinery, coal mining machinery, etc.
Used to monitor the chronic tilt of objects (for example: overhead cable towers, high-rise buildings, bridges, etc.).
Wireless fan vibration and shaft temperature sensor
Used for scenes with slow temperature changes and monitoring of periodic vibration intensity of objects.
Expansion joint deformation sensor
The busbar expansion joint is an important part of the GIS equipment. It is mainly used to absorb the thermal expansion and contraction of the equipment, the displacement of the foundation expansion joint, the installation and adjustment of the equipment, and the various stresses caused by earthquakes and operations to ensure that the busbar The other parts are intact.
Semiconductor condensation dehumidification module
It is used for condensation and dehumidification in small and enclosed environments, such as outdoor terminal boxes and control cabinets. Use with "intelligent temperature and humidity controller".
It is suitable for monitoring the physical status of power equipment, and is generally used for equipment anti-theft.
10kV Intelligent Lightning Arrester
It monitors the temperature of the arrester, the leakage current and the number of lightning strikes by itself.
JC-WQX-ZN01 Weather monitoring and detection device
The world's advanced temperature and humidity measurement technology, long-term stable humidity measurement technology.
Accurate ultrasonic wind speed and direction measurement technology ensures stable operation in the industrial range.
MEMS air pressure sensor with full range accuracy.
Ultra-low power consumption (0.2W), especially suitable for battery-powered systems with high power consumption requirements.
Optical time-of-flight image sensor IC
MLX75026 QVGA is the second member of the third generation of fully integrated optical time-of-flight (ToF) sensor IC. This product is compatible with VGA resolution ToF sensor IC MLX75027. Target applications include automotive driver monitoring (DMS), in-vehicle monitoring (ICM), external protection and robotics, automated transportation (AGV), human and 3D object detection in industry, retail, logistics, and smart cities. In car interior sensing applications, a VGA resolution sensor can cover the entire interior space, but the QVGA TOF sensor MLX75026 can provide similar resolution for multiple single-seat areas, such as for driver monitoring, body position monitoring, Crew classification, etc. This sensor IC has a QVGA (320×240) pixel array, a small package and a small ¼” optical size. It is fully compatible with the VGA ToF sensor IC, which can greatly promote the reuse of existing software, thereby Simplify the migration path between cost-effective QVGA and more high-end VGA solutions.
The wide-band current sensor has the advantages of high accuracy, bandwidth, high sensitivity and no need for external power supply, etc. It is especially suitable for the measurement of pulsed high current and harmonic current. The main performance indicators of the current sensor have been tested by authoritative departments, reaching the advanced level of similar products in the world; it is cost-effective and easy to use. Small batch customization is acceptable.
Personalized smart device manufacturer
We can provide you with satisfactory customized service
Contact Us
Sales Telephone:
0519-8585-1518
Address:
5C, gongyanhui science and Technology Industrial Park, 160 Xihu Road, Wujin high tech Zone, Changzhou City, Jiangsu Province
Email:13861009301@163.com
Social Media
Sales Consulting
WeChat official account
Copyright © 2022 Jiangsu jotry Electric Technology Co., Ltd