Product System

Product System

Product System

Wireless UHF spatial amplifier sensor


Detection frequency band: 300-1500mhz Monitoring range: space partial discharge within 20 meters Protection grade: IP65 AC220V active power supply is adopted for power supply Communication mode: wireless transmission of Lora

Wireless battery monitoring device


Overall voltage monitoring range: dc0v ~ 220V Current monitoring range: 0 ~ 1000A Environmental temperature monitoring: 0 ~ 100 ℃ Measurement range of internal resistance: 0.1M Ω~ 100m Ω  Wireless communication based on Lora

Wireless intelligent door lock


The input format of the reader is Wiegand 26 / 34 (compatible with hid, EM, Mifare1 and mobile card readers under the protocol), Power supply voltage: DC12V Communication mode: Lora wireless transmission

Wireless transformer noise sensor


The power supply adopts DC12V active power supply Measurement frequency range: 20Hz ~ 12.5khz Noise measurement range: 30dB ~ 120dB Communication mode: wireless transmission of Lora

Wireless ozone sensor


Battery / active power supply is adopted for power supply O3 measurement range: 0-20ppm O3 precision:< ± 0.1ppm(25℃) Communication mode: wireless transmission of Lora

Intelligent air conditioning / dehumidification linkage device


AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 4-8 independent node output capability Communication mode: 470MHz wireless communication based on Lora

Intelligent lighting linkage device


AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 4-8 independent node output capability Communication mode: 470MHz wireless communication based on Lora

Intelligent fan linkage device


AC / dc220v power supply is adopted, The allowable deviation is - 20% ~ + 20%; Input voltage: DC12V / DC24V; Control output node capacity: AC / dc220v, ≥ 8a, support 4-8 independent node output capacity; Communication mode: 470MHz wireless communication based on Lora

Wireless water level sensor


Power supply voltage: lithium sub battery dc3.6v Output interface: wireless Lora Cable length: 1.6 ± 0.1 m  Insulation resistance: > 500 Measurement range: 0-5m (measurement range can be customized)

Wireless SF6 gas detector


The detector has SF6 gas concentration For SF6 detection, ultrasonic principle is adopted SF6 gas concentration measurement range: 0-3000ppm SF6 concentration overrun alarm point: 1000ppm (national standard value) Accuracy < 5% FS

Wireless smoke sensor


Wireless smoke sensor

Wireless door magnetic sensor


Door state sensing distance: 20-30mm Power supply voltage: lithium sub battery dc3.6v Output interface: wireless lor

Wireless flooding sensor


Power supply voltage: lithium sub battery dc3.6v Communication mode: Lora wireless transmission

Wireless temperature and humidity sensor


Power supply voltage: lithium sub battery dc3.6v Communication mode: Lora wireless transmission Temperature: - 20 ~ + 125 ℃ Humidity: 0-99% RH

JC-MC-ZN03 Door Magnetic Sensor


The JC-MC-ZN03 door magnetic sensor is mainly composed of two parts: a switch and a magnet. The switch part is made up of a reed switch connected by a lead wire, and is shaped and packaged; the magnet part is encapsulated in a plastic or alloy shell with a corresponding magnetic field strength. After the two are separated or close to a certain distance, it will cause the switch to open, thereby sensing the change of the object's position.
< 1...345...20 >