Product System

Product System

Product System

Wireless data transmission base station (all-round type)


It is used to receive and gather surrounding sensor information, and transmit the data to the control host or other terminals through a variety of transmission methods (485, Ethernet, GPRS, etc.).

Wireless methane gas sensor


Monitor whether the methane concentration in complex environments such as cable trenches, cable wells, mines, and mines exceeds the standard.

Wireless infrared dot matrix temperature sensor 4*4


Non-contact surface temperature monitoring of equipment or environment

Wireless lightning arrester leakage current sensor


Monitor the leakage current, resistive current and the number of actions of metal zinc oxide arresters with voltage levels of 500KV and below

Wireless infrared single point temperature sensor


This product uses infrared imaging technology to perform non-contact measurement with infrared as the medium, which can reliably measure the surface temperature of objects, and has the advantages of small size, high accuracy, wide measurement range, and easy installation and use.

Convergence Controller


Sensor data gathering and uploading

10kV Intelligent Lightning Arrester


It monitors the temperature of the arrester, the leakage current and the number of lightning strikes by itself.

3G aggregation node


Receive sensor data and upload data via 3G.

Switchgear local on-line monitoring system


The partial discharge signal can be continuously monitored online through the sensor installed in each switch cabinet Monitor and detect the regular and continuous abnormal insulation status signal in the switch Provide early warning of early failures, reduce unplanned downtime and reduce maintenance costs Can provide alarms, trends and forecasts, data storage for at least 10 years Computer operation without human influence

JC-OM400 local on-line monitoring system


Applicable voltage level: GIS equipment of various voltage levels Measurement channel: 8 channels System frequency band: 300MHz-1.6GHz Detection sensitivity: -65dBm Sampling rate: greater than 10MS/s Data interval: each partial discharge coupler records a data interval of 2S Time to save data: permanent

JC-OM400Q Omnidirectional UHF Sensor V2.0


The installation is simple, non-contact, remote monitoring, and does not affect the equipment. One-time investment, the overall cost is low. Complementary with manual inspection, reducing hidden dangers caused by long-term inspections. Strong anti-interference ability, rich software database, automatic identification and elimination of interference signals.

JC-GS200 Series Intelligent Integrated Gas Detector


Detection principle: methane: infrared; Oxygen, carbon monoxide, hydrogen sulfide, hydrogen, temperature, humidity: electrochemistry; Detection gas: methane (CH4); oxygen (O2); carbon monoxide (CO); hydrogen sulfide (H2S); hydrogen (H2);

Temperature and humidity transmitter (JC-DL/1-08)


The temperature and humidity transmitter includes a temperature and humidity measurement unit and a communication unit. The temperature and humidity measurement part adopts a digital output temperature and humidity module, which has the characteristics of high accuracy and good repeatability. In summary, the transmitter can monitor changes in environmental temperature and humidity in real time and online, and upload the detected data through the RS-485 bus.

JC-OM201 Transformer Core/Clamp Grounding Online Monitoring System


The through-core transformer is used, which is completely isolated from the secondary circuit and has high safety It adopts distributed measurement structure, namely on-site measurement and digital transmission, and the protocol complies with DL/T860 standard It can be installed with electricity, that is, it does not need to install the main equipment without power failure, and it is convenient and fast to access the system Using digital filtering methods to eliminate the "zero drift problem" caused by analog filters Using high-precision active zero magnetic flux sensor, intelligently select the conditioning circuit and magnification according to the magnitude of the measured current, which effectively improves the measurement accuracy With on-site real-time temperature and humidity measurement function

SF6 micro water density transmitter


No emissions, environmental protection, economy, safety and reliability Online monitoring of SF6 circuit breakers or combined electrical appliances such as water, density, temperature and other parameters Realize micro-water pressure and temperature compensation, density temperature compensation, make micro-water and density data true and reliable Using sensors with a variety of patented technologies and self-calibration functions The acquisition unit can be put into operation and exit without affecting the state of the main equipment, and does not affect the normal operation of the main equipment The internal circulation technology is used inside the acquisition unit to greatly improve the sampling accuracy On-site large-screen LCD display, drawing trend graphs, real-time uploading Built-in density relay passive output, movable point value of blocking/alarm/overpressure can be set Fully enclosed design, waterproof and dustproof, anti-high frequency interference, suitable for indoor and outdoor A variety of valve joints, easy to install and disassemble, saving maintenance costs