Comprehensive monitoring ball for transmission line conductor status

With the rapid development of social economy, all walks of life have put forward higher requirements for the quality and quantity of power supply, and the safety of line operation has become an important indicator of power grid reliability. At present, the main factor threatening the safe and stable operation of the line has changed from the original equipment factor to the external force damage, such as the suspension of foreign objects, municipal engineering, large-scale machinery hitting the line, etc. The transmission line often lacks real-time monitoring and leads to the occurrence of transmission line accidents. Special R&D and design of transmission line conductor monitoring system to provide early warning of such incidents. When the equipment that affects the safety of the transmission line is close to the arming area, the monitor sensing device system will promptly detect and activate early warning information, such as flashing voice, information, image capture and other functions. Some monitors can be linked with the background.


Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Free consultation telephone:

Product Details

Voltage: 10KV~1000KV;

Impulse current: 50KA, 60MS; 33KA, 200MS; 15KA, 2S;

Power: 12W;

Display mode: strobe cycle 2 seconds (on 1S, off 1S);

Maximum brightness: >32.5cd;

Alarm detection angle: horizontal 120 degrees, vertical 60 degrees;

Alarm detection distance: center 0-10M;

Alarm sound transmission: effective radius of sound transmission is 40m;

Work load current: not less than 50A;

Visible range of light source: 0-100m;

Ambient temperature: -40℃~80℃

Environmental humidity: 0~100%;

Fixture installation wire diameter: 15mm to 45mm;

Spherical diameter: 280mm;

Alarm methods: flashing, voice (for example, "high voltage danger, please do not approach"), information notification, linkage with the background platform, image capture (wire current needs to be more than 80A). (Optional for alarm mode);


Related Products

Current monitoring sensor of arrester in switchgear

Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor

Power supply: dc6 ~ 12V Range: 0.01 Ω- two hundred Ω  Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor

Sensitivity: 5pc Detection frequency band: 50KHz ~ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor

Range: ± thirty °  Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet

Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor

Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor

Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C; two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)

The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)

The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device

AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability

Intelligent light control unit

Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Intelligent water pump control unit

Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Welcome your message consultation

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline:0519-85851518