配电站所物联网网关-Jiangsu jotry Electric Technology Co., Ltd.

配电站所物联网网关

配电站所物联网网关是配电站房监控系统的“感官系统”，是智慧物联体系“云管边端”架构的边缘设备，具备信息采集、物联代理及边缘计算功能，支撑营、配电及新兴业务。采用硬件平台化、功能软件化、结构模块化、软硬件解耦、通信协议自适配设计，满足高性能并发、大容量存储、多采集对象、人工智能分析的需求。实现配电站房数据和视频的采集、存储、分析、加密、上报以及设备的协议适配、工况自检分析等功能。

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Category:

汇聚节点、接入节点、站房网关

Free consultation telephone:

0519-85851518

Message

产品概述

配电站所物联网网关是配电站房监控系统的“感官系统”，是智慧物联体系“云管边端”架构的边缘设备，具备信息采集、物联代理及边缘计算功能，支撑营、配电及新兴业务。采用硬件平台化、功能软件化、结构模块化、软硬件解耦、通信协议自适配设计，满足高性能并发、大容量存储、多采集对象、人工智能分析的需求。实现配电站房数据和视频的采集、存储、分析、加密、上报以及设备的协议适配、工况自检分析等功能。

技术参数

技术参数		技术参数
CPU	四核 1.6GHz	视频相关协议	ONVIF、GB28181、 Q/GDW 1517.1-2014 电网视频监控系统及接口（SIP-B）
GPU	双核 900MHz
RAM/ROM	4GB DDR/8GB EMMC	IoT相关协议	IEC61850、104、MQTT、Modbus 输变电设备物联网节点设备无线组网协议、输变电设备物联网微功率无线网通信协议
AI算力	4Tops INT8
操作系统	Linux 4.9内核
		电力安防算法	安全帽检测、反光衣检测、人员检测、火焰检测、周界检测、跌倒检测
容器	支持Docker部署
		设备状态监测算法	状态开关检测、指针表读表、数字表读表、指示灯检测、呼吸器颜色检测、设备外观检测
视频编解码	H.264/H.265/MJPEG/JPEG
加密	支持ESAM加密、支持TF卡加密
		视频质量诊断算法	信号丢失、图像模糊、亮度异常、偏色、噪声、遮挡、画面冻结、视频抖动检测
供电	AC 220V（允许偏差±20%）
功耗	典型功耗：12W 最大功耗：20W
		北向接口	24G、1GE WAN、兼容5G
工作温度	-20°C~70°C
		南向接口	2LoRa、1Wifi/BT、4GE LAN、 4RS485、2RS232、1CAN、 4DO、8DI、2AI（4~20mA）、2AI （0~10V）
工作湿度	5%~90%（非凝露）
防护等级	IP40
尺寸	482.5×204×44.3mm	本地接口	HDMI、Audio、2*USB 2.0、TF卡插槽

功能特点

物联网关特性：

容器化应用管理：应用容器化部署，按需扩展，分隔管理即插即用：源边模型自动注册，实现一键接入

就地分析：高性能边缘计算，实现运行情况就地分析

支持协议：IEC61850、IEC60870-5-104、MQTT、Modbus、输变电设备物联网节点设备无线组网协议、输变电设备物联网微功率无线网通信协议

视频网关特性：

视频接入：支持多路视频接入、多格式编解码

人工智能分析：内置AI算力，可同时处理4路以上实时视频算法算法库：每路视频算法支持灵活配置，算法模块可单独升级

支持协议：国网B接口、GB28181、ONVIF

应用场景

Related Products

Maintenance-free intelligent transformer breather

The maintenance-free transformer breather is an air dehumidification and purification device used for oil-immersed transformers, instrument transformers, on-load tap changers, or other electrical equipment filled with insulating liquid. The maintenance-free transformer breather is installed at the air inlet of the instrument transformer's oil storage tank. When the transformer or instrument transformer operates, the oil volume changes due to temperature variations, causing the gas inside the oil storage tank to breathe through the desiccant. Air passes through the filter at the bottom of the desiccant and the glass jar filled with silica gel into the transformer, ensuring that the inhaled air is dry (moisture is adsorbed by the desiccant) and clean (dust and impurities are blocked by the filter), thereby maintaining the cleanliness and insulation strength of the transformer oil.

JC-OM700-EE Wireless Expansion Joint Sensor

The JC-OM700-EE wireless expansion joint sensor achieves online monitoring of expansion joint compensation by modifying the existing mechanical vernier caliper of GIS/GIL expansion joints or adding a digital expansion joint displacement sensor. The wireless expansion joint sensor uses a high-speed ARM chip as the main controller and a high-precision displacement sensor to sample and calculate the displacement data of the measured object in real time. It can upload data to the host computer via wireless LoRa and wired RS485.

Current monitoring sensor of arrester in switchgear

Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor

Power supply: dc6 ～ 12V Range: 0.01 Ω- two hundred Ω Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor

Sensitivity: 5pc Detection frequency band: 50KHz ～ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor

Range: ± thirty ° Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet

Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor

Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor

Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C； two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)

The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)

The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device

AC / dc220v power supply is adopted Allowable deviation - 20% ～ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability