管廊综合监控-Jiangsu jotry Electric Technology Co., Ltd.

管廊综合监控

综合管廊是指设置于地面下用于容纳天然气、电力、电信、给水、雨水、污水乃至垃圾等多种不同管线，设有专门的检修口、吊装口、实施统一规划、设计、建设和管理的构造物及附属设施。综合管廊附属设施是综合管廊重要的组成部分，支撑其常态化的运转以及紧急状态下的处理。附属设备包括消费、通风、供电、照明、监控与报警、排水、标识系统等基础设施以及上述设施的信息化系统建设。同时，如何充分利用这些信息化系统辅助实现对综合管廊的常态化运维以及应急状态下的响应，以提高对综合管廊整体的管理能力也是在建设时需要重点考虑的问题。

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Category:

电缆隧道综合监控系统

Free consultation telephone:

0519-85851518

Message

管廊综合监控

综合管廊是指设置于地面下用于容纳天然气、电力、电信、给水、雨水、污水乃至垃圾等多种不同管线，设有专门的检修口、吊装口、实施统一规划、设计、建设和管理的构造物及附属设施。
综合管廊附属设施是综合管廊重要的组成部分，支撑其常态化的运转以及紧急状态下的处理。附属设备包括消费、通风、供电、照明、监控与报警、排水、标识系统等基础设施以及上述设施的信息化系统建设。同时，如何充分利用这些信息化系统辅助实现对综合管廊的常态化运维以及应急状态下的响应，以提高对综合管廊整体的管理能力也是在建设时需要重点考虑的问题。

总体框架

监测和报警系统

移动管理系统及运维管理系统

通过该系统实现移动客户端--手持终端与管理平台端的通信，使主管领导、管理人员、运行维护人员、应急抢险人员等随时随地的掌握系统的运行状态，能在第一时间对突发事件作出响应。同时，该系统也向市民手机终端发布公告、通知等信息，并能收集市民发现上报的问题等。

工程图片

Related Products

Maintenance-free intelligent transformer breather

The maintenance-free transformer breather is an air dehumidification and purification device used for oil-immersed transformers, instrument transformers, on-load tap changers, or other electrical equipment filled with insulating liquid. The maintenance-free transformer breather is installed at the air inlet of the instrument transformer's oil storage tank. When the transformer or instrument transformer operates, the oil volume changes due to temperature variations, causing the gas inside the oil storage tank to breathe through the desiccant. Air passes through the filter at the bottom of the desiccant and the glass jar filled with silica gel into the transformer, ensuring that the inhaled air is dry (moisture is adsorbed by the desiccant) and clean (dust and impurities are blocked by the filter), thereby maintaining the cleanliness and insulation strength of the transformer oil.

JC-OM700-EE Wireless Expansion Joint Sensor

The JC-OM700-EE wireless expansion joint sensor achieves online monitoring of expansion joint compensation by modifying the existing mechanical vernier caliper of GIS/GIL expansion joints or adding a digital expansion joint displacement sensor. The wireless expansion joint sensor uses a high-speed ARM chip as the main controller and a high-precision displacement sensor to sample and calculate the displacement data of the measured object in real time. It can upload data to the host computer via wireless LoRa and wired RS485.

Current monitoring sensor of arrester in switchgear

Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor

Power supply: dc6 ～ 12V Range: 0.01 Ω- two hundred Ω Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor

Sensitivity: 5pc Detection frequency band: 50KHz ～ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor

Range: ± thirty ° Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet

Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor

Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor

Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C； two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)

The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)

The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device

AC / dc220v power supply is adopted Allowable deviation - 20% ～ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability