Fiber optic vibration intrusion monitoring

The V500 series of fiber-optic vibration intrusion monitoring products use the phase and intensity of the back-to-Rayleigh scattered light transmitted in the optical fiber to obtain relevant information about external disturbance events, and determine the disturbance position according to the time delay of the incident light and the probe light. So as to realize the long-distance distributed disturbance monitoring and alarm. This system is composed of AV500 series optical fiber vibration intrusion monitoring host, disturbance detection optical cable, monitoring management software and related accessories. It can detect intrusion behavior in real time and intelligently identify the location of intrusion through the detection optical cable laid on the monitoring defense line, providing a powerful way to prevent illegal intrusion. Guaranteed.

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Free consultation telephone:

Product Details

The V500 series of fiber-optic vibration intrusion monitoring products use the phase and intensity of the back-to-Rayleigh scattered light transmitted in the optical fiber to obtain relevant information about external disturbance events, and determine the disturbance position according to the time delay of the incident light and the probe light. So as to realize the long-distance distributed disturbance monitoring and alarm. This system is composed of AV500 series optical fiber vibration intrusion monitoring host, disturbance detection optical cable, monitoring management software and related accessories. It can detect intrusion behavior in real time and intelligently identify the location of intrusion through the detection optical cable laid on the monitoring defense line, providing a powerful way to prevent illegal intrusion. Guaranteed.

Monitoring distance: 50Km

Number of channels: 1-8

Communication interface: LAN/RS485/RS232

Communication protocol: ModBus TCP/AgiPro

Input power: AC220V

Working environment: temperature 0℃-40℃, relative humidity≦95% (non-condensing)

Power consumption: 30W (maximum warm-up power 60W)

Weight: 23Kg

Dimensions: standard 19” 4U rack-mounted chassis, 178mm(H)*440mm(W)*470mm

Related Products

Current monitoring sensor of arrester in switchgear


Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor


Power supply: dc6 ~ 12V Range: 0.01 Ω- two hundred Ω  Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor


Sensitivity: 5pc Detection frequency band: 50KHz ~ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor


Range: ± thirty °  Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet


Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor


Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor


Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C; two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)


The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)


The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device


AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability

Intelligent light control unit


Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Intelligent water pump control unit


Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Welcome your message consultation

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline:0519-85851518