变压器噪声传感器

变压器噪声传感器

变压器噪声传感器是一种数字化、模块化多功能声级计。采用了数字信号处理芯片及数字检波技术，具有可靠性高、稳定性好、动态范围宽、无需量程转换等优点。可广泛应用于各种机器、车辆、船舶、电器等工业噪声测量，也可用于环境噪声、劳动保护、工业卫生的测量。

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Category:

常规变电物联网传感器

Free consultation telephone:

0519-85851518

Message
Related Products

Product Details

变压器在线监测--变压器噪声传感器


 

产品概述

 

 

    变压器在线监测--变压器噪声传感器是一种数字化、模块化多功能声级计。采用了数字信号处理芯片及数字检波技术，具有可靠性高、稳定性好、动态范围宽、无需量程转换等优点。可广泛应用于各种机器、车辆、船舶、电器等工业噪声测量，也可用于环境噪声、劳动保护、工业卫生的测量。
 

<strong><strong><strong><strong><strong><strong>变压器噪声传感器</strong></strong></strong></strong></strong></strong>.jpg
 

 

技术参数

 

 

   测量范围：30~130dB（A）

   灵 敏 度： -38±3dB(或12.6mv/Pa)

   分 辨 率：0.1dB
   精 确 度：±3dB，在环境温度23±5℃，频率加权符合IEC 61672 type 2标准，在输入信号为 94dB (1kHz)的条件下进行校准。

   频率范围：20Hz 到 12.5kHz

   响应时间：200ms，时间响应模拟人耳的时间响应
   校 正 器：B&K（Bruel & kjaer公司），多功能声音校准器，型号4231。

   麦 克 风：驻极体麦克风

   指 向 性：360度

   麦克风尺寸：0.5英寸

   供电方式：□DC5V

   □DC9V-30V

   □其他        

   输出方式：□RS485（□Modbus □ASCII）

   □RS232（□Modbus □ASCII）

   □4-20mA

   □0-20mA

   □0-5V

   □0-2.5V

   □1-5V

   传感器线：□标配：2.5米

   □其它______

   负载能力：DC12V供电时，电流型输出阻抗≤350Ω

             DC24V供电时，电流型输出阻抗≤900Ω；电压型输出阻抗≥1KΩ

   最大功耗：500mW

   产品材质：铝合金

   产品净重：165g

   包装净重：400g（含包装和传感器线）

   工作环境：温度-40℃～80℃

   湿度≤100%RH无凝露

   防护等级：IP55

 

 

Related Products

Current monitoring sensor of arrester in switchgear

Current monitoring sensor of arrester in switchgear

Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485
Ground resistance sensor

Ground resistance sensor

Power supply: dc6 ～ 12V Range: 0.01 Ω- two hundred Ω  Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54
High frequency current sensor

High frequency current sensor

Sensitivity: 5pc Detection frequency band: 50KHz ～ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping
Tilt sensor

Tilt sensor

Range: ± thirty °  Voltage: 9-35v Output mode: RS485 IP67 protection level
Infrared thermal imaging camera of switch cabinet

Infrared thermal imaging camera of switch cabinet

Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)
Space UHF PD sensor

Space UHF PD sensor

Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years
Micro weather sensor

Micro weather sensor

Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C； two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S
Switch cabinet partial discharge sensor (UHF)

Switch cabinet partial discharge sensor (UHF)

The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)
Switch cabinet partial discharge sensor (UHF + AE two in one)

Switch cabinet partial discharge sensor (UHF + AE two in one)

The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge
Intelligent air conditioning / dehumidification linkage device

Intelligent air conditioning / dehumidification linkage device

AC / dc220v power supply is adopted Allowable deviation - 20% ～ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability
Intelligent light control unit

Intelligent light control unit

Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep
Intelligent water pump control unit

Intelligent water pump control unit

Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Welcome your message consultation

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline:0519-85851518
Submit

Personalized smart device manufacturer

We can provide you with satisfactory customized service

Submit
%{tishi_zhanwei}%