红外双鉴探测器

红外双鉴探测器是安防科技领域的高性能探测器,由高精度专用红外探测装置和微处理芯片组成,采用一体设计、稳定可靠,具有更精确、更强的探测和抗干扰、抗误报能力。  

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Free consultation telephone:

Product Details

红外双鉴探测器

 

 

产品概述


 

   红外双鉴探测器是安防科技领域的高性能探测器,由高精度专用红外探测装置和微处理芯片组成,采用一体设计、稳定可靠,具有更精确、更强的探测和抗干扰、抗误报能力。  

 

    主要具有四项功能:可红外探测非法入侵后即进行现场高响声报警,起吓阻作用;可使用遥控器对该探测器进行无线遥控布防或撤防,方便用户对探测器的控制;可长距离转发其他小功率门磁、探测器的报警信号;可直接探测非法入侵信号后长距离发射给主机。
 

无线红外双鉴传感器.jpg

 

产品功能




  1、远程发射:红外探测到警戒范围内的活动人体目标,发射数字编码信号,无线传输距离3-10公里。

  2、转发功能:接收短距离(100-300米)报警信号(如门磁、小功率探测器)将其远程转发(3-10公里),组成廉价、快速的无线报警网。   
  3、现场高响声报警,起吓阻作用。   
  4、使用遥控器进行布防或撤防、紧急报警,方便用户对探测器的控制。   
  5、红外探测与芯片微处理相结合,排除普通探测器无法克服的干扰,只对人体移动作出报警,降低误报率,可靠性强。   
  6、抗灯光、热气流、电磁幅射、宠物干扰。        
  7、采用自动温度补偿电路,保证探测灵敏度。   
  8、灵敏度分高、中、低三档调节,适用于不同场合。   
  9、抗干扰模式选择,避免因小动物的活动而造成的误报。   
  10、配专用万向节,探测角度自由调节,使用方便快捷。   
  11、可选配备用可充电池,平时涓流充电,交流停电自动切换直流供电。

  12、K-波段的腔体微波 ,稳定性能高

  13、精巧、超薄的外观设计

  14、加强型微处理器处理技术

  15、电子温度补偿(双温度传感器:1微波和1PIR)

  16、自适应式探测门限处理技术;更快的捕获能力

  17、灵敏度均匀的光学系统,解决被探测主体近大远小的误差

  18、防虫光路系统

  19、ABS外壳坚固耐用,防震功能


 

技术参数

  交流(AC):220V/50Hz  ±15%     
  备用电池:8.4V (选购) 
  静态电流:≤15 mA                
  报警电流:≤300mA 
  探测角度: 110°                   
  工作温度:-10℃~40℃             
  探测距离:6-12米                  
  发射距离:3-10公里(开阔地) 
  灵 敏 度:三档探测距离选择      
  抗干扰模式选择:强、弱 
  声响时间选择:30秒、3分钟          
  外观尺寸:122mm×66mm×56 mm

 

 

Related Products

Current monitoring sensor of arrester in switchgear


Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor


Power supply: dc6 ~ 12V Range: 0.01 Ω- two hundred Ω  Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor


Sensitivity: 5pc Detection frequency band: 50KHz ~ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor


Range: ± thirty °  Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet


Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor


Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor


Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C; two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)


The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)


The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device


AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability

Intelligent light control unit


Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Intelligent water pump control unit


Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Welcome your message consultation

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline:0519-85851518