智能除湿器-Jiangsu jotry Electric Technology Co., Ltd.

智能除湿器

智能除湿器充分利用温差大时，空气中的水分易凝露的特点，产品内置凝水面上产生非常低的温度（能达到-35℃），使空气中水分冷凝在凝水面，并通过排水孔排出箱体外，保持电柜内部干燥。由于电柜内水分不断减少排出箱外，柜内空气中的湿度显著下降。即使环境湿度变化，由于电柜内空气中水分非常少，也不会再产生凝露，从根本上解决了电柜内湿度困扰。

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Category:

常规配电物联网传感器

Free consultation telephone:

0519-85851518

Message

智能除湿器

产品概述

无线智能除湿器水印图.jpg

产品特点

1、使用先进的 OLED 液晶显示技术。

2、界面显示清楚，内容丰富，比市场上的数码或者普通 LCD 拥有更好的人机界面，操作更方便，使用更简单，产品具有中英文显示，满足各类客户的需求。

3、专为电力行业设计，外形独特一体化结构，外壳采用不锈钢 304 且拉丝处理，做工精致，电源内置，充分考虑安全距离，安装简单，维护成本低，适用于对宽度及高度均受限制的场合。

4、迅速降低电气控制柜内湿度，将箱体中的水气冷凝后变成水直接排出箱体外，解除湿气困扰，保证电气设备运行安全，湿度稳定后自动节能环保。

5、带温湿度显示，工作阀值可调，全自动运行，外置手动开关。

6、无线通讯方式，配置无线模块实现无线通讯功能。

7、配套监控软件，远程温湿度监测、超阈值告警、历史数据查询。

技术参数

电源：AC220V（±10%），50Hz	功率：60W
显示方式：OLED 液晶显示	湿度启动阀值：65%（默认）
除湿量：400ml/天（温度 35℃，湿度 85%RH 工况）	工作环境：温度-30℃～80℃
适合工作湿度范围：0%～95%RH	推荐除湿空间：1～2m³
通信方式：无线GPRS	传输距离：移动信号覆盖范围
外形尺寸：11016248mm（宽高厚）	重量：1kg

Related Products

Current monitoring sensor of arrester in switchgear

Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor

Power supply: dc6 ～ 12V Range: 0.01 Ω- two hundred Ω Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor

Sensitivity: 5pc Detection frequency band: 50KHz ～ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor

Range: ± thirty ° Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet

Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor

Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor

Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C； two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)

The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)

The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device

AC / dc220v power supply is adopted Allowable deviation - 20% ～ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability

Intelligent light control unit

Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Intelligent water pump control unit

Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep