灯光联动装置JC-DG-ZN02

灯光联动装置外观时尚(外观可定制),使用便捷,能准确的接收监测主机传送过来的信息,进行打开现场风机动作。具有可靠的自恢复过流保护,实用性强,可长时间连续工作,安装灵活方便。

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Free consultation telephone:

Product Details

灯光联动装置

 

产品介绍

 

  灯光联动装置外观时尚(外观可定制),使用便捷,能准确的接收监测主机传送过来的信息,进行打开现场风机动作。具有可靠的自恢复过流保护,实用性强,可长时间连续工作,安装灵活方便。

 

产品特点


1、过载保护,运行稳定

2、可根据客户需要定制输出控制功率

3、抗干扰性强、产品性能稳定
4、装置采用基于LoRa的470MHz频段无线通信。

 

技术参数

 

● 工作电源

采用AC/DC220V供电,允许偏差-20%~+20%。
 

● 结构

结构防护等级满足IP40防护等级要求,采用螺钉或卡扣安装。
 

● 技术参数

a) 状态量输入电压:DC12V/DC24V;

b) 控制输出节点容量:AC/DC220V,≥8A,支持2路独立的节点输出能力。

c) 使用年限:≥5年;

d) 风机交流接触器出口电压:AC380V,输出容量≥30A.
 

● 通信

a) 通信方式:采用基于LoRa的470MHz频段无线通信,满足输变电设备物联网节点设备无线组网协议。

b) 无线传输距离:大于50米;

c)  可接受网关的控制信息进行联动操作。

 


 

 

Related Products

Current monitoring sensor of arrester in switchgear


Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor


Power supply: dc6 ~ 12V Range: 0.01 Ω- two hundred Ω  Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor


Sensitivity: 5pc Detection frequency band: 50KHz ~ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor


Range: ± thirty °  Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet


Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor


Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor


Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C; two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)


The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)


The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device


AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability

Intelligent light control unit


Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Intelligent water pump control unit


Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Welcome your message consultation

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline:0519-85851518