JC-TLOM300C Transmission Line Micro-meteorological Online Monitoring System

Transmission line micro-meteorological online monitoring system is a set of multi-element micro-meteorological monitoring system designed for the meteorological environment monitoring of transmission lines in special locations.

Keyword:

Power IoT sensors Smart power distribution Internet of Things Smart cable tunnel gallery Smart power generation Internet of Things Smart Internet of Things

Free consultation telephone:

Product Details

Transmission line micro-meteorological online monitoring system is a set of multi-element micro-meteorological monitoring system designed for the meteorological environment monitoring of transmission lines in special locations. It can monitor the meteorological parameters of ambient temperature, humidity, wind speed, wind direction, and air pressure, and transmit the collected various meteorological parameters and their changes to the system host in real time through the mobile phone wireless network. The system host can perform the collected data Storage, statistics and analysis, and display all data to users through various reports, statistical graphs, curves, etc. When an abnormal situation occurs, the system will issue a pre-alarm message in a variety of ways to remind managers to pay attention to the alarm point or take necessary preventive measures.

Scope of application: transmission lines and substations of various voltage levels;

Monitoring data volume: ambient temperature, humidity, wind speed, wind direction, rainfall, air pressure, battery voltage;

Temperature measurement range: -40℃~+120℃; Temperature measurement accuracy: ±0.2℃;

Humidity measurement range: 0%RH~100%RH; Humidity measurement accuracy: ±2%RH;

Wind speed measurement range: 0~75m/s; Wind speed measurement accuracy: ±(0.3+0.03V)m/s;

Wind direction measurement range: 0~360°; Wind direction measurement accuracy: ±3°;

Rainfall measurement range: 0~4mm/min; Rainfall measurement accuracy: ±0.4mm;

Air pressure measurement range: 500 hPa~1100 hPa; Air pressure measurement accuracy: ±0.1 hPa;

Solar radiation intensity: 0~1800w/m2; solar radiation measurement accuracy: less than 2%

Communication method: GSM/GPRS/CDMA wireless communication;

Solar battery power: 20W;

Operating ambient temperature of the monitoring unit: -40℃~+85℃;

Operating environment humidity of the monitoring unit: no more than 98%;

Protection level of monitoring unit: IP66;

Battery life: more than 5 years;

Solar panel service life: more than 10 years;

Software system: free upgrade for life

Related Products

Current monitoring sensor of arrester in switchgear


Full current measurement range: 0.050 ~ 5.000mA Full current measurement error: ± (standard reading ×1%+5μA) Record the cumulative discharge times :0 ~ 99 times Power supply: DC24V Communication interface: RS-485

Ground resistance sensor


Power supply: dc6 ~ 12V Range: 0.01 Ω- two hundred Ω  Accuracy: ± 2%rdg ± 3dgt(20℃ ± 5 ℃, below 70% RH) Communication mode: RS485 Protection grade: IP54

High frequency current sensor


Sensitivity: 5pc Detection frequency band: 50KHz ~ 100MHz Signal output: RS485 Installation position: cable connector ground wire Installation mode: clamp type, clamping

Tilt sensor


Range: ± thirty °  Voltage: 9-35v Output mode: RS485 IP67 protection level

Infrared thermal imaging camera of switch cabinet


Thermal imaging resolution: 160 * 120 Visible light resolution: 200W Power supply: dc12-24 V Temperature range: - 20 ℃ ~ 150 ℃ Accuracy: ± 2 ℃ or 2% of the reading (take the maximum absolute value)

Space UHF PD sensor


Detection frequency band: 300 ~ 1500mhz Protection grade: IP65 Collect the discharge amplitude and phase The service life is more than 8 years

Micro weather sensor


Temperature: measuring range - 40 ~ 60 ℃ ° C Accuracy ± zero point one ° C; two Temperature: measurement range 0 ~ 100% RH Air pressure: measuring range: 10 ~ 1300 Wind speed measurement range: 0-75 M / S

Switch cabinet partial discharge sensor (UHF)


The system adopts UHF principle to conduct local discharge monitoring of high voltage switchgear to ensure the effective monitoring data, and increase system reliability. Ultra low power consumption and 485 bus communication mode are adopted. It is applicable to switch cabinet and ring network cabinet. Each cabinet is equipped with one set to realize the power / qualitative measurement of local discharge. It can be directly connected to the system host without the limitation of host channel.)

Switch cabinet partial discharge sensor (UHF + AE two in one)


The system adopts UHF + AE principle Ultra low power consumption and 485 bus communication mode are adopted, It is suitable for switch cabinet and ring main unit to realize the quantity / qualitative measurement of partial discharge

Intelligent air conditioning / dehumidification linkage device


AC / dc220v power supply is adopted Allowable deviation - 20% ~ + 20% Control output node capacity: AC / dc220v, ≥ 8A Support 2-4 independent node output capability

Intelligent light control unit


Output mode: switch type, realize local and remote control of lighting Wall mounted / 2U rack mounted Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Intelligent water pump control unit


Output mode: switch type, realize the linkage control of water pump Wall mounted / 2U rack mounted, Using brand devices to ensure reliability Size (mm): 480mm long × 85mm wide × 340mm deep

Welcome your message consultation

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline:0519-85851518